|
Edge Impulse setup script error on Jetson Nano
|
|
0
|
19
|
August 15, 2025
|
|
Quantization option for BYOM
|
|
2
|
126
|
August 13, 2025
|
|
Training via CLI script yields only ~35% accuracy, while I previously observed ~99% accuracy using the GUI with the same parameters
|
|
1
|
81
|
August 11, 2025
|
|
## Issue: Unable to Flash Firmware on Seeed Grove Vision AI Module V2 (WiseEye2)
|
|
1
|
100
|
August 11, 2025
|
|
Issue with Bouffalo Lab Dev Cube
|
|
1
|
85
|
August 11, 2025
|
|
Configuring ESP32-WROOM-32 WIFI connection for remotely data collection
|
|
3
|
655
|
August 11, 2025
|
|
ESP32-S3-N16R8: Failed to allocate persistent buffer of size 512, does not fit in tensor arena and reached EI_MAX_OVERFLOW_BUFFER_COUNT
|
|
5
|
156
|
August 4, 2025
|
|
ESP32 wrover b connected to ov 2640 camera , is it is supported bz edgeimpulse
|
|
3
|
59
|
July 31, 2025
|
|
500 Internal Server Error when uploading samples"
|
|
1
|
65
|
July 30, 2025
|
|
Error Cloning Public Project: "Cannot read properties of undefined (reading 'filter')"
|
|
2
|
59
|
July 29, 2025
|
|
Seeed Studio Grove Vision AI v2 on SenseCAP A1102 + Edge Impulse: No useful data sent via LoRaWAN after flashing model
|
|
3
|
123
|
July 29, 2025
|
|
🆘 Unable to Compile Gesture Recognition Sketch in Arduino IDE (ESP32 WROOM)
|
|
1
|
62
|
July 28, 2025
|
|
Inference predictions results on model for BYOM
|
|
2
|
121
|
July 21, 2025
|
|
Arduino ZIP Model Metadata always shows Input Width and Height as 0 (ESP32)
|
|
1
|
66
|
July 21, 2025
|
|
Failed to generate model: The current implementation only support frame_size_samples of 512 when building firmware
|
|
1
|
124
|
July 14, 2025
|
|
Data collection with DAQ board
|
|
2
|
76
|
July 11, 2025
|
|
Arduino Nano 33 BLE Sense rev2 acquisitions are empty
|
|
2
|
225
|
July 9, 2025
|
|
Connection with arduino Nano 33
|
|
0
|
92
|
July 7, 2025
|
|
Seeed Grove Vision AI Module V2 gets stuck with anomaly detection model,
|
|
0
|
153
|
June 30, 2025
|
|
Failed to initialize linux tool Error: Cannot find any webcams
|
|
2
|
420
|
June 29, 2025
|
|
Stuck "Still building" Nicla Voice Firmware
|
|
2
|
102
|
June 27, 2025
|
|
Installing Edge Impulse CLI @serialport/bindings Error
|
|
3
|
153
|
June 26, 2025
|
|
Sample data timeout from IMU and ADC sensors on ESP32-S3-EYE
|
|
1
|
141
|
June 26, 2025
|
|
Arduino Deployment with Nicla Vision - Initial Success Followed by “Failed to run classifier”
|
|
12
|
366
|
June 24, 2025
|
|
Unable to run model on Jetson Orin Nano
|
|
2
|
231
|
June 18, 2025
|
|
AI Audio Labeling Bulk 5m Recording
|
|
2
|
139
|
June 16, 2025
|
|
ESP32-S3: SIMD Acceleration (ESP-NN/ESP-DSP) Not Effective for run_classifier
|
|
1
|
426
|
June 6, 2025
|
|
Suggestions to improve accuracy and performance of my sound classification project using both keyword spotting and environmental sounds
|
|
2
|
281
|
June 6, 2025
|
|
ArduCam for Raspberry Pi
|
|
1
|
239
|
June 3, 2025
|
|
When I try to stream audio from my Arduino Nicla Voice into Edge Impulse via the edge-impulhttps://forum.edgeimpulse.com/t/getting-error-failed-to-sample-data-timeout-wse-daemon, sampling immediately fails with a timeout error (AT+SAMPLESTART=Microphone)
|
|
1
|
205
|
May 30, 2025
|