Need help with first UNO Q model

Help
, ,
#1

Question/Issue:
Created a new keyword spotting model for a custom wake word. Test great in edge impulse. Using it on example ‘Hey Arduino’ and wake word does not trigger.

Project ID:
Smallbeck project-1

Context/Use case:
New wake word model for Arduino Q

Steps Taken:

  1. [Step 1]
  2. [Step 2]
  3. [Step 3]

Expected outcome
When selecting my custom model and running ‘Hey Arduino’ example app, board should respond to my new custom wake word.

Actual Outcome:
Board did not respond when using custom wake word, reverting to out of the box model and board responds to ‘Hey Arduino’ wake word

Reproducibility:

  • [x] Always
  • [ ] Sometimes
  • [ ] Rarely

Environment:

  • Platform: [e.g., Raspberry Pi, nRF9160 DK, etc.]
  • Build Environment Details: [e.g., Arduino IDE 1.8.19 ESP32 Core for Arduino 2.0.4]
  • OS Version: [e.g., Ubuntu 20.04, Windows 10]
  • Edge Impulse Version (Firmware): [e.g., 1.2.3]
  • To find out Edge Impulse Version:
  • if you have pre-compiled firmware: run edge-impulse-run-impulse --raw and type AT+INFO. Look for Edge Impulse version in the output.
  • if you have a library deployment: inside the unarchived deployment, open model-parameters/model_metadata.h and look for EI_STUDIO_VERSION_MAJOR, EI_STUDIO_VERSION_MINOR, EI_STUDIO_VERSION_PATCH
  • Edge Impulse CLI Version: [e.g., 1.5.0]
  • Project Version: [e.g., 1.0.0]
  • Custom Blocks / Impulse Configuration: [Describe custom blocks used or impulse configuration]
    Logs/Attachments:
    [Include any logs or screenshots that may help in diagnosing the issue]

Additional Information:
[Any other information that might be relevant]