I just want to know if it is possible to deploy image recognition to Arduino Nano BLE 33 Sense
I am able to compile "static_buffer " in Arduino IDE and it can be uploaded to the board. Yet, when I want to have a look on serial port, the IDE gets stuck at the beginning. After more than 10mins, the serial port comes out but nothing can be seen, there is a message saying that something goes wrong on serial port setting(as you can see below)
My image recognition model is still within the capacity of the board so I am not sure the reason behind it.(Maybe related to RAM?)
Size of image in the model above is 96*96 and I am using MobileNetV1 0.2 as NN model.
I have also tried a smaller model(see below), image size is 48*48 with MobileNetV1 0.1 (no final dense layer, 0.1 dropout) as NN model. Yet, after uploading to Arduino, the board cannot be found on COM port until I press reset button in order to trigger bootloader mode
I am using Arduino Mbed OS Nano Boards 2.1.0 with platform.local.txt
Looking forward to any suggestion!!!