Edge-impulse-daemon -Error

Mani · January 29, 2021, 7:10am

After installing Edge impulse cli , When I run the command - edge-impulse-daemon, I am facing this issue

C:\Users\Manivannan>edge-impulse-daemon
C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\bindings\bindings.js:135
throw err;
^

Error: Could not locate the bindings file. Tried:
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\build\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\build\Debug\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\build\Release\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\out\Debug\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\Debug\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\out\Release\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\Release\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\build\default\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\compiled\14.15.4\win32\x64\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\addon-build\release\install-root\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\addon-build\debug\install-root\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\addon-build\default\install-root\bindings.node
→ C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\lib\binding\node-v83-win32-x64\bindings.node
at bindings (C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\bindings\bindings.js:126:9)
at Object. (C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\lib\win32.js:1:36)
at Module._compile (internal/modules/cjs/loader.js:1063:30)
at Object.Module._extensions…js (internal/modules/cjs/loader.js:1092:10)
at Module.load (internal/modules/cjs/loader.js:928:32)
at Function.Module._load (internal/modules/cjs/loader.js:769:14)
at Module.require (internal/modules/cjs/loader.js:952:19)
at require (internal/modules/cjs/helpers.js:88:18)
at Object. (C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules@serialport\bindings\lib\index.js:6:22)
at Module._compile (internal/modules/cjs/loader.js:1063:30) {
tries: [
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\build\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\build\Debug\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\build\Release\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\out\Debug\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\Debug\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\out\Release\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\Release\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\build\default\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\compiled\14.15.4\win32\x64\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\addon-build\release\install-root\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\addon-build\debug\install-root\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\addon-build\default\install-root\bindings.node’,
‘C:\Users\Manivannan\AppData\Roaming\npm\node_modules\edge-impulse-cli\node_modules\@serialport\bindings\lib\binding\node-v83-win32-x64\bindings.node’
]
}

janjongboom · January 29, 2021, 9:23am

@Mani could you post the output of

npm uninstall -g edge-impulse-cli
npm install -g edge-impulse-cli

Mani · January 31, 2021, 5:51pm

Hey @janjongboom , the issue get resolved , when I upgraded the Visual studio C++ to the latest version. Thank you

01fe20bec237 · November 13, 2022, 11:59am

hey what is your visual studio version
which version is suitable to run edge impulse daemon command

01fe20bec237 · November 13, 2022, 12:11pm

internal/modules/cjs/loader.js:883
throw err;
^

Error: Cannot find module ‘C:\Users\khush\AppData\Roaming\npm\node_modules\edge-impulse-cli\build\cli\daemon.js’
←[90m at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15)←[39m
←[90m at Function.Module._load (internal/modules/cjs/loader.js:725:27)←[39m
←[90m at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:72:12)←[39m
←[90m at internal/main/run_main_module.js:17:47←[39m {
code: ←[32m’MODULE_NOT_FOUND’←[39m,
requireStack: []

i am still getting these errors what to do

shawn_edgeimpulse · November 15, 2022, 4:53pm

Hi @01fe20bec237,

It looks like the Edge Impulse CLI was not correctly installed. Please try the steps found on this thread: Cant find data forwarder

01fe20bec237 · November 18, 2022, 6:32am

now i am getting these errors continously even after updating the edge impulse cli

[SER] Connecting to COM5
[SER] Serial is connected, trying to read config…
[SER] Failed to get info off device Timeout when waiting for > (timeout: 5000) onConnected
[SER] Serial is connected, trying to read config…
[SER] Failed to get info off device Timeout when waiting for > (timeout: 5000) onConnected
[SER] Serial is connected, trying to read config…
[SER] Failed to get info off device Timeout when waiting for > (timeout: 5000) onConnected
[SER] Serial is connected, trying to read config…

louis · November 18, 2022, 2:51pm

Hello @01fe20bec237,
Did you uploaded the Edge Impulse firmware to your device correctly? Which hardware target are you using by the way?
The issue can also come from a bad usb cable.

Best,

Louis

Nelum · December 5, 2023, 11:22am

Hello Louis,

I am attempting to connect my Arduino Nano with plate number 1 to Edge Impulse. I am using Ubuntu 22.04 operating system and following the steps for the setup provided below :

Here are the steps I have followed so far:

Executed the command “curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/install.sh | bash”
Installed Node.js by running “nvm install node”
Installed Edge Impulse CLI globally using “npm install -g edge-impulse-cli --force” and “npm install -g edge-impulse-cli”
Started the Edge Impulse daemon using “HTTPS_PROXY=… edge-impulse-daemon”
Updated the system using “sudo apt update”
Installed snapd using “sudo apt install snapd”
Installed Arduino CLI using “sudo snap install arduino-cli”
Flashed the Linux shell using “sudo bash flash_linux.sh”
9.sudo apt install git

brew update
brew install arduino-cli

Adding Environment variable to your path :
echo ‘export PATH=“/home/dsg/bin:$PATH”’ >> ~/.bashrc
echo ‘export PATH=“/home/dsg/bin:$PATH”’ >> ~/.bashrc

However, when I am getting the error, (base) nelum@nelum-X510UA:~$ edge-impulse-daemon
Segmentation fault (core dumped)

louis · December 5, 2023, 2:24pm

Hello @Nelum,

Could you share your project ID.
I suspect that your model is too big to run on the Arduino Nano (by the way which version of the Nano do you use?)

Best,

Louis

Nelum · December 5, 2023, 2:42pm

Hello @louis ,

My project Id is 286469. I am using Arduino Nano 33 BLE. It is not connected to Edge Impulse yet.

I am getting the below error when installing edge impulse cli
(base) nelum@nelum-X510UA:~$ npm install -g edge-impulse-cli
npm WARN deprecated @zeit/dockerignore@0.0.5: “@zeit/dockerignore” is no longer maintained
npm WARN deprecated request-promise@4.2.4: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported

changed 378 packages in 31s

14 packages are looking for funding
run npm fund for details

louis · December 5, 2023, 4:02pm

Hello @Nelum,

These are just warnings, your CLI seems properly installed.

Best,

Louis