Trying to change pin values in Edge Impulse RP2040 firmware source code to recompile it and upload it to the board

[dataexplorer007]

Question/Issue: Change pin values in RP2040 firmware source code

Project ID: 362668

Context/Use case: Build NN using the accerlerometer and gyroscope

I am working on a Pico project where my Raspberry Pi Pico is connected to LSM6DSOX and I want to understand how to change the pin values in RP2040 firmware source code so that I recompile it and upload it to board so that I can read 6-axis accelerometer and gyroscope.

[Eoin]

Edge Impulse Data Forwarder

Hi @dataexplorer007 You would be better off to create a simple program that outputs data to be forwarded here is some pseudo code to build on, if you do want to customise the firmware I have added some steps to follow at the end. import serial, time # Initialize serial connection to RP2040 ser = serial.Serial('COM_PORT', 115200) # Update 'COM_PORT' with your actual port while True: # Read sensor data from RP2040 sensor_data = read_sensor_data() # Format data as CSV string da…