E (468) Camera 0x105 (ESP_ERR_NOT_FOUND)

Hi everyone. I am encountering a 0x105 error, and I tried solutions such as editing #define CAMERA_MODEL_AI_THINKER and changine board configurations, but nothing works. I am currently working on using the FOMO model on ESP32-CAM that I recently bought from ESP32-CAM-CH340 USB Serial to Bluetooth and WIFI Camera Development Bo – Makerlab Electronics

This is the exact error that I encountered:

Hi @johnbaracael,

Are you using this pins?

OV2640 CAMERA ESP32 Variable name in code
D0 GPIO 5 Y2_GPIO_NUM
D1 GPIO 18 Y3_GPIO_NUM
D2 GPIO 19 Y4_GPIO_NUM
D3 GPIO 21 Y5_GPIO_NUM
D4 GPIO 36 Y6_GPIO_NUM
D5 GPIO 39 Y7_GPIO_NUM
D6 GPIO 34 Y8_GPIO_NUM
D7 GPIO 35 Y9_GPIO_NUM
XCLK GPIO 0 XCLK_GPIO_NUM
PCLK GPIO 22 PCLK_GPIO_NUM
VSYNC GPIO 25 VSYNC_GPIO_NUM
HREF GPIO 23 HREF_GPIO_NUM
SDA GPIO 26 SIOD_GPIO_NUM
SCL GPIO 27 SIOC_GPIO_NUM
POWER PIN GPIO 32 PWDN_GPIO_NUM

Have you tried removing and putting the camera back in?
Have you activated PSRAM?